Powering Up the Router 23MountingInstructions forWood WallsTo wall mount the unit:1 Make two holes 98 mm (3.9 in.) apart.2 Fix two suitable screws directly into the wall, leaving their heads 3 mm(0.12 in.) clear of the wall surface. The screws should be at least 20 mm(0.75 in.) long.3 Remove any connections in the Router and locate it over the screw heads.When in line, gently push the Router on to the wall and move itdownwards to secure.CAUTION: When making connections, be careful not to push the unit upand off the wall.Powering Up theRouterTo power up the Router:1 Plug the power adapter into the power adapter socket located on theback panel of the Router.2 Plug the power adapter into a standard electrical wall socket.Connecting theRouterThe first step for installing your Router is to physically connect it to thetelephone socket and then connect it to a computer in order to be able toaccess the Internet. See Figure 6 and Figure 7:
