3Com pcXset - NBX - PC Getting Started Manual

Also see for PCXSET: Reference guide

Contents

Configuring the pcXset Software 93 Use the Configuration Wizard tabs to configure the pcXset software.■ Welcome — Introduction.■ Audio — Test the client computer’s audio controls for compatibilitywith the pcXset software.■ Mic — Test the headset microphone’s compatibility with the pcXsetsoftware.■ MAC Info — Enter the NBX system’s MAC address.■ IP Info — Enter the NBX system’s IP address, subnet mask, and defaultgateway. The wizard can locate this information automatically.■ NetSet — Add the pcXset software to the Call Processor using theNetSet utility.■ Country — If you want the pcXset tones and cadences and Help touse the same regional settings as the NBX system, select the a settingon the Country tab. To specify different regional settings for tones andcadences and Help, enable the Use Advanced Settings check box andclick Advanced.■ Done! — Finish the pcXset configuration process.The user can now start using the pcXset application, and may customizethe pcXset display and other settings at any time.Table 1 Windows Access ButtonsWindows Configuration Type ButtonMultimedia Control Panel — Displays Multimedia propertiesfor your PC.Volume Control — Allows you to set the volume forspeaking and listening using the pcXset application.Network Control Panel — Provides information on networkdevices, such as network interface card parameters,protocols, and IP addresses.Microsoft System Information — Displays information aboutyour system, such as operating system, memory, andprocessors. You must specify the MAC address of yournetwork adapter if you manually add the pcXset client as anew device in the NBX system.