3M MP7740i Operator's Manual

Also see for MP7640I: Product safety guide Operator's guide Specifications Operator's guide

3M MP7740i Operator's Manual Manual pdf 16 page image

ENGLISH-14OOOO PPPP EEEE RRRR AAAA TTTT IIII OOOO NNNN SSSS (((( cccc oooo nnnn tttt iiii nnnn uuuu eeee dddd ))))Options MenuThe following adjustments and settings are available when OPT. isselected on the menu. Select an item with the and buttons, andstart operation..Table 7. Options MenuVOLUMEMENU COLORLANGUAGEAUTO OFFSYNC ON GWHISPER16SETUP INPUT OPT.IMAGEItem DescriptionVOLUME Volume Adjustment: Reduce VOLUME ↔ Increase VOLUMEMENU COLOR Select Menu Background Color: Select with the and buttons.LANGUAGE Operation Start/Stop: Press the or button.Select Menu Display Language: Select with the and buttons.AUTO OFFOperation Start/Stop: Press the or button.Set AUTO OFF: Set 1~99 minutes with the and buttons. Thesystem automatically enters the standby mode when a signal is notreceived for the set time.Clear AUTO OFF: Select STOP (0 min.) with the button. WhenSTOP is selected the system does not enter the standby mode even ifno signal is received.SYNC ON GOperation Start/Stop: Press the or button.SYNC ON G Valid: Select TURN ON with the button.SYNC ON G Invalid: Select TURN OFF with the button.• May not be displayed correctly with some input signals when SYNC ON G isvalid. In such cases, remove the signal connector so that no signal is received,set SYNC ON G to invalid, and reconnect the signal.WHISPEROperation Start/Stop: Press the or button.Set/Clear Wisper Mode: Press / button. When the WHISPER isselected, the WHISPER mode is active. In the WHISPER mode,acoustic noise level from the unit is reduced, brightness level on screenis a little lower.3M™ Multimedia Projector MP7740i© 3M 2002. All Rights Reserved.