3M Multimedia Projector MP8647 Operator's Manual

Also see for Multimedia Projector MP8647: Quick start guide

3M Multimedia Projector MP8647 Operator's Manual Manual pdf 16 page image

wnloaded from Projector.coENGLISHENGLISH-15OOOO PPPP EEEE RRRR AAAA TTTT IIII OOOO NNNN SSSS (((( cccc oooo nnnn tttt iiii nnnn uuuu eeee dddd ))))Options MenuThe following adjustments and settings are available when OPT. isselected on the menu. Select an item with the and buttons, andstart operation.Table 7. Options MenuVOLUMEMENU COLORTIMERLANGUAGEAUTO OFFSYNC ON GWHISPER128SETUP INPUT OPT.IMAGEItem DescriptionVOLUME Volume Adjustment: Reduce VOLUME ↔ Increase VOLUMEMENU COLOR Select Menu Background Color: Select with the and buttons.TIMEROperation start/stop: Press the or button.Setup initial timer value:Set 1~99 minutes with the and buttons.LANGUAGE Operation Start/Stop: Press the or button.Select Menu Display Language: Select with the and buttons.AUTO OFFOperation Start/Stop: Press the or button.Set AUTO OFF: Set 1~99 minutes with the and buttons. Thesystem automatically enters the standby mode when a signal is notreceived for the set time.Clear AUTO OFF: Select STOP (0 min.) with the button. When STOPis selected the system does not enter the standby mode even if no signalis received.SYNC ON GOperation Start/Stop: Press the or button.SYNC ON G Valid: Select TURN ON with the button.SYNC ON G Invalid: Select TURN OFF with the button.• May not be displayed correctly with some input signals when SYNC ON G isvalid. In such cases, remove the signal connector so that no signal is received, setSYNC ON G to invalid, and reconnect the signal.WHISPEROperation Start/Stop: Press the or button.Set/Clear Wisper Mode: Press and button. When the WHISPER isselected, the WHISPER mode is active. In the WHISPER mode, acoustic noiselevel from the unit is reduced, and brightness level on screen is a little lower.