3M Multimedia Projector S10 Operator's Manual

Also see for Multimedia Projector S10: Quick start guide Specification sheet Safety guide Operator's guide

3M Multimedia Projector S10 Operator's Manual Manual pdf 9 page image

wnloaded from Projector.co8Adjusting The Projector's ElevatorCAUTION • If you press the elevator buttons without holding the projector, theprojector might crash down, overturn, smash your fingers and possibly result inmalfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLDTHE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.You can use the elevator feet to make adjustments if the surface on which you need to setthe projector is uneven or if you otherwise need to adjust the angle of projection. Theadjustment range of the elevator feet is 0 to 9 degrees.1 Press and hold in the elevator buttons.2 Raise or lower the projector to thedesired height and then release theelevator buttons.When you release the elevator buttons, the elevatorfeet will lock into position.3 As necessary, you can also finelyadjust the height of the projector bytwisting the elevator feet by hand.Elevator buttonsElevator feetSetting Up (continued)