3M S50/X50 Operator's Manual
Also see for Multimedia Projector S50: User guideQuick start guideSpecification sheetOperator's guide
                                         | |
Contents
| 
6Adjusting the Projector's Elevator Foot1 Press and hold in the elevatorbutton2 Raise or lower the projector to thedesired height and then release theelevator buttonWhen you release the elevator button, the elevatorfoot will lock into position.3 As necessary, you can also finelyadjust the left-right slope of theprojector by twisting the rear footYou can use the elevator foot to make adjustments if the surface on which youneed to set the projector is uneven or if you otherwise need to adjust the angle ofprojection. The adjustment range of the elevator foot is 0 to 9 degrees.CAUTION • Install the projector in a suitable environment according to instructionsof the "Product Safety Guide" and this "Operator's Guide".• If you press the elevator button without holding the projector, the projector mightcrash down, overturn, smash your fingers and possibly result in malfunction. Toprevent damaging the projector and injuring yourself, ALWAYS HOLD THEPROJECTOR whenever using the elevator button to adjust the elevator foot.SETTING UP THE PROJECTOR9Rear Foot Adjusteradjuster screw by hand |
Related manuals for 3M Multimedia Projector S50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine