3M X30N Operator's Manual
Also see for Digital Projector X30N: Specification sheetProduct warranty and safety guideOperator's guideNetwork guideOperator's guide
                                                                            | |
Contents
| 
20 © 3M 2009. All Rights Reserved.3M™ Digital Projector X30N/X35NOperating1. Press POSITION button on the remote control when no menu isindicated.The “POSITION” indication will appear on the screen.Adjusting the position2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position.When you want to reset the operation, press RESET button onthe remote control during the operation.To complete this operation, press POSITION button again. Thedialog will automatically disappear after a few seconds.● When this function is performed on a video signal, s-video signal or componentvideo signal, some image such as an extra-line may appear at outside of thepicture.● When this function is performed on a video signal, s-video signal or componentvideo signal, the range of this adjustment depends on OVER SCAN in IMAGEmenu (30) setting. It is not possible to adjust when OVER SCAN is set to 10.● If POSITION button is pressed when a menu is indicated on screen, the displayedpicture does not move its position but the menu does.1. Press AUTO button on the remote control.Pressing this button performs the following.Using the automatic adjustment feature For a computer signalThe vertical position, the horizontal position and the horizontalphase will be automatically adjusted.Make sure that the application window is set to its maximum sizeprior to attempting to use this feature. A dark picture may still beincorrectly adjusted. Use a bright picture when adjusting. For a video signal and s-video signalThe video format best suited for the respective input signal will be selectedautomatically. This function is available only when the AUTO is selected forthe VIDEO FORMAT item in the INPUT menu (33). The vertical position andhorizontal position will be automatically set to the default.● The automatic adjustment operation requires approx. 10 seconds. Also pleasenote that it may not function correctly with some input.● When this function is performed for a video signal, a certain extra such as a linemay appear outside a picture.● When this function is performed for a computer signal, a black frame may bedisplayed on the edge of the screen, depending on the PC model.● The items adjusted by this function may vary when the FINE or DISABLE is selectedfor the AUTO ADJUST item of the SERVICE item in the OPTION menu (46).POSITION buttonPAGE UPPAGEDOWNVIDEO MY SOURCE/DOC.CAMERASTANDBY/ONFREEZEMAGNIFYASPECT SEARCHAUTO BLANKMUTEVOLUMEKEYSTONE MY BUTTONPOSITIONESCENTERMENURESETCOMPUTERAUTO button For a component video signalThe vertical position, horizontal position and horizontal phase will beautomatically set to the default.PAGE UPPAGEDOWNVIDEO MY SOURCE/DOC.CAMERASTANDBY/ONFREEZEMAGNIFYASPECT SEARCHAUTO BLANKMUTEVOLUMEKEYSTONE MY BUTTONPOSITIONESCENTERMENURESETCOMPUTER |
Related manuals for 3M Digital Projector X30N
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine