3M X56 Operator's Manual

Also see for X56: Application guide Specifications Safety guide Operator's guide

3M X56 Operator's Manual Manual pdf 5 page image

5Introduction3M™ Digital Projector X56© 3M 2011. All Rights Reserved.General installationNOTICE ► Position the projector to prevent light from directly hitting theprojector’s remote sensor.• Do not place the product in a place where radio interference may be caused.CAUTION ► Place the projector in a cool place with sufficient ventilation.• Keep a space of 30 cm or more between a side of the projector and otherobjects such as a wall. If you install two projectors in Style 2 (6), keep aspace of 30 cm or more between the two projectors.• Do not stop up, block nor cover the projector’s vent holes.• Do not place the projector at places that are exposed to magnetic fields, doingso can cause the cooling fans inside the projector to malfunction.► Avoid placing the projector in smoky, humid or dusty place.• Do not place the projector near humidifiers. Especially for an ultrasonichumidifier, chlorine and minerals contained in tap water are atomized andcould be deposited in the projector causing image degradation or otherproblems.WARNING ► Install the projector where you can access the power outleteasily.► Do not subject the projector to unstable conditions. Install the projector in astable horizontal position.• Do not use any mounting accessories except the accessories specified by themanufacturer. Read and keep the manuals of the accessories used.• For special installation such as ceiling mounting, be sure to consult yourdealer beforehand. Specific mounting accessories and services may berequired.► Do not install the projector near thermally conductive or flammable things.► Do not place the projector where any oils, such as cooking or machine oil,are used.► Do not place the projector in a place where it may get wet.