3M X56 Safety Manual

Also see for X56: Application guide Specifications Operator's guide Operator's guide

Contents

3M X56 Safety Manual Manual pdf 13 page image

13© 3M 2011. All rights reserved.Product Warranty and Safety GuideENGLISH3M™ Digital Projector X56LampLamp Operation:The following symptoms may indicate a lamp in need of replacement:• LAMP indicator lights up red.• To reduce the risk associated with environmental contamination due tomercury in the projection lamp:- Dispose of lamp cartridge in accordance with applicable federal, state and local regulations.- The lamp in this product contains mercury. Dispose of projection lamp in a mannerthat is consistent with your local hazardous waste regulations for mercury.- For recycling and disposal information, contact your respective governmentalagencies.In U.S., contact 1-800-328-1371 (3M US) or the Electronic Industries Alliance atwww.lamprecycle.orgIn Canada, contact 1-800-364-3577 (3M Canada)WARNINGDisplay Lamp Operation HoursTo determine the lamp operation hours, follow these steps:1. While the projector is running, press the MENU button on the remote control.Choose the “OPTION” using the ▼ button, and press the ► button or the ENTER button.Choose the “LAMP TIME” using the ▼ button.2. The operating time of the lamp will be displayed.The lamp time is the time counted after the last resetting.√ NoteFor an accurate indication of elapsed lamp time, only reset the lamp time to zero when thelamp is replaced.Reset Lamp Hours(1) Press the MENU button to display the EASY MENU.(2) Point at the “Go To Advance Menu …” in the menu using ▼/▲ button, then press the► button.(3) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then pressthe ► button.(4) Point at the ”LAMP TIME” using ▼/▲ button, then press the ► button. A dialog willappear.(5) Press the ► button to select “RESET” on the dialog. This resets the lamp time.