3Ware 720-0104-00 Manual

Also see for 9000 Series: Installation guide User guide Specification Release notes

Contents

3Ware 720-0104-00 Manual Manual pdf 23 page image

Info Commandswww.3ware.com 19info cidProvides overall summary information on controller cid. The report consistsof two parts; a unit summary listing all present units, and a port summarysection listing all present disks and their attached ports.The unit summary section lists all present units specifying their unit number,unit type (such as RAID 5), status, size (usable capacity) in gigabytes orterabytes, number of blocks, and unit status such as OK, VERIFYING,INITIALIZING, etc. %Compl reports percent completion of REBUILDINGor VERIFYING units. It shows the Stripe size, if applicable, and whetherCache is on or off. It also shows whether AutoVerify and OvrECC are on oroff (9000 only). OvrECC is short for Overwrite ECC, or Force Continue onsource error. The function is explained in “Set Commands” on page 43.The port summary section lists all present ports specifying the port number,disk status, unit affiliation, size (GB), blocks (of 512 bytes), and the serialnumber assigned by the disk vendor.Additional attributes about units, ports and disks can be obtained by queryingfor them explicitly. See other info sub-commands below.Typical output looks like:3ware CLI> info c0Unit UnitType Status %Cmpl Stripe Size Cache AVerify OvrECC---------------------------------------------------------------u0 RAID-1 OK - - 149.05 ON OFF OFFu1 RAID-5 OK - 64k 298.22 ON OFF OFFu2 SPARE OK - - 149.05 ON OFF -Port Status Unit Size Blocks Serial--------------------------------------------------------------p0 OK u0 149.05 GB 312581808 3JS0TF14p1 OK u0 149.05 GB 312581808 3JS0TETZp2 OK u1 149.05 GB 312581808 3JS0VG85p3 OK u1 149.05 GB 312581808 3JS0VGCYp4 OK u1 149.05 GB 312581808 3JS0VGGQp5 OK u2 149.05 GB 312581808 3JS0VH1Pp6 OK - 149.05 GB 312581808 3JS0TF0Pp7 OK - 149.05 GB 312581808 3JS0VF43p8 OK - 149.05 GB 312581808 3JS0VG8Dp9 NOT-PRESENT - - - -p10 NOT-PRESENT - - - -p11 NOT-PRESENT - - - -3ware CLI calculates one megabyte as 1024 x 1024, the same calculation thatWindows and Linux use. 3DM 2 uses 1024 x 1024, so when using 3DM 2, thecapacity listed will match the capacity stated by the CLI. Previous versions of3DM (v1.x) calculate one megabyte as 1000 x 1000, which is the calculationdisk drive vendors use.