4IPNET EAP210 Quick Installation Manual

Also see for EAP210: User manual Quick installation guide User manual

Contents

4IPNET EAP210 Quick Installation Manual Manual pdf 9 page image

Quick Installation GuideEAP210 Enterprise Access Point ENGLISHCopyright © 4IPNET, INC. All rights reserved. 5Getting Started4ipnet EAP210 supports web-based configuration. When hardware installation is complete, EAP210 can beconfigured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0and above.The default values of LAN IP address and subnet mask of EAP210 are:IP Address: 192.168.1.1Subnet Mask: 255.255.255.0Steps:1. To access the Web Management Interface, connect the administrator PC to the LAN port of EAP210 viaan Ethernet cable. Then, set a static IP address on the same subnet mask as EAP210 in TCP/IP of yourPC, such as the following example:IP Address: 192.168.1.100Subnet Mask: 255.255.255.02. Launch the web browser on your PC by entering the IP address of EAP210 (http://192.168.1.1) at theaddress field, and then press Enter.3. The following Admin Login Page will appear. Enter “admin” for both the Username and Password fields,and then click Login.Administrator Login Page