4IPNET OWL530 Quick Installation Manual

Also see for OWL530: User manual Quick installation guide User manual

Contents

4IPNET OWL530 Quick Installation Manual Manual pdf 11 page image

Quick Installation GuideOWL530 Outdoor AP/Bridge/CPE ENGLISHCopyright © 4IPNET, INC. All rights reserved. - 7 -Getting Started4ipnet OWL530 supports web-based configuration. OWL530 is a dual-mode system where AP Mode is thedefault mode, can be configured as either an access point (AP Mode) or a gateway (CPE Mode) based onyour deployment needs. It is required to follow the respective installation procedures provided to properly setup the desired mode for this system. Default IP Address of Web Management Interface:The default IP address and Subnet Mask for the AP mode and CPE mode are as follows:Mode AP Mode CPE ModeIP Address 192.168.1.1 192.168.1.1Subnet Mask 255.255.255.0 255.255.255.0Step 1: IP Segment Setup for Administrator PCTo access the Web Management Interface, connect the administrator PC to the Uplink port of OWL530 via anEthernet cable. Then, set a static IP address on the same subnet mask as OWL530 in TCP/IP of your PC, suchas the following example:IP Address: 192.168.1.100Subnet Mask: 255.255.255.0Step 2: Launch Web BrowserLaunch a web browser to access the web management interface of AP mode by entering the default IPaddress, http://192.168.1.1/, in the URL field, and then press Enter.Example of entering OWL530's default IP Address via a web browserStep 3: System LoginThe system manager Login Page will then appear.Enter “admin” in the User name field and “admin” in the Password field, and then click Login to log in.Administrator Login Page