A-Collection aFlood tec Mounting Instructions
Also see for aFlood tec: Mounting instructions
    |
Maximum projected area of the floodlight:12W: 0.024m224W: 0.037m 248W: 0,083m 272W: 0.083m 2120W: 0.136m2150W: 0,136m2200W: 0.136m 2Dimension of Tempered Glass:12W: 165x128x4 (mm)24W: 213x163x4 (mm)48W DLS: 320x242x4 (mm)72W: 320x242x4 (mm)120W: 390x332x5 (mm)150W: 390x332x5 (mm)200W: 390x332x5 (mm)*aFlood LED Tec Symmetric DLS modelWhen the light level drops below 25 lux, the floodlight automaticallyturns on, turning off again when the light level rises about 75 lux.Mounting InstructionsFloodlight aFlood tecDimensionsUnit: mmMountingStep 1: Open the packaging and examine the fixture. If the fixtureis damaged, please contact the distributor.Step 2: Mount the fixture's bracket to a wall or clamp.Step 3: Adjust the fixture's position and angle the light in thedesired direction before tightening the screws on the sideof the fixture.Step 4: Make sure the cables are connected correctly.Brown - Line Blue - Neutral Yellow/Green - EarthSafety Message:• Electrical installations should only be carried out by a licensed electrician.• Switch off the power to the fixture and wait until it has cooled down before disassembling.• In the event of faults, the power to the fixture must be switched off immediately.Do not attempt to repair the fixture yourself.Contact your Ahlsell retailer to replace the fixture.• The mininum distance from lighted objectsto luminaries shall be kept at least 0.3mOutput H1 H2 L1 L2 T D1 D2 W1 W2 R Ø12W 175 205 135 150 42 31 8 20 8.5 4.25 8.524W 220 251 170 200 45 35 9 30 10.5 5.25 10.548W 290 330 225 243 55 40 9 35 11 5.5 12.548W DLS 330 372 250 265 75 40 9 40 11 5.5 12.572W 330 372 250 265 75 40 9 40 11 5.5 12.5120W 400 450 340 360 90 55 20 55 13 6.5 13150W 400 450 340 360 90 55 20 55 13 6,5 13200W 400 450 340 360 90 55 20 55 13 6.5 13ENGLISH |
Related manuals for A-Collection aFlood tec
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine