A1 Touch AOD 170 User Manual
              | |
Page112.4 Option: 10 pts Projected-capacitive-touchscreenProjected capacitive sensor Float laminated glass, glare is standard, tempered is option.Glass Glass with black borders on back surface.Chemical resistance Acetone, ammonia-based glass cleaners, hexane, isopropylalcohol, methylene chloride, mineral spirits, turpentine, methylethyl ketone, gasoline, kerosene, vinegar.Contact bounce Around 5 ms for finger contactActivation force No activation force neededInput modus Finger, glove hand (rubber, cloth, leather)Surface hardness Mohs’ hardness rating: 7Resolution 2048x2048Position accuracy (linearity) less then 1%Operating life ∞Light transmission 90% ±2%Projected capacitive controller USB is standard, RS232 (option)Power consumption controller 50mA typical,50mV peak to peak maximum ripple and noiseInterface USB: 1,1 Full Speed ('plug-and-play' compatible is standard)Operating Temperature -25 to 80°CRelative Humidity 95% at 60°C, RH Non-condensingResolution 2048x2048Report rate USB: Single touch Max. 200 points/sec10 pts touch Max.points/sec eachResponse time Max. 20msSupport operating system( eGAlax_eMPIA-controller)Microsoft Windows: ME/2000,9x/XP/Vista/7/8/10CE 2.12/3.0/.net/5.0/6.0 ; Embedded ; XP Tablet PC editionMac OS9, Mac OS X,(IBM, Intel CPU)Linux: Red Hat (7.3/8.0/9.0), Mandrake (9.1/9.1/10) SuSE(9.2,9.3,10,10.1) Fedora (Core I ,II ,III,IV,V,VI)Yellow (Dog 3.x), Debian (Kernel 2.4.X/2.6.X), Ubuntu (5.1,6.06),Mandriva (2005,2006)Android 2.0 – Google , Moblin V2 - IntelQNX: RTOS v6.32.5 OPTION: IR TOUCHChemical resistance Acetone, ammonia-based glass cleaners, isopropylalcohol, turpentine, methy alcohol, methyl ethyl ketone,toluene, gasoline, kerosine, vinegarTouch activation force no minimum touch activation is requiredInput modus everything bigger than 6,5 (W) x 6,5 (H)Life performance ∞Supply voltage +5V DC(±5%)Supply current ~ 150mAInterface standard RS232 baud rate: 9600, 8 data bits, 1 stop bit, no parity, full duplexElectrostatic discharge protection prEN 61000-4-2, 1995: meets Level 4 (15kV air / 8kV contactdischarges)Touchpoint density Based on controller resolution, up to 4096x4096Light transmission Over 90% (per ASTM1003)Conversion time less than20 msSupport operatingsystemMicrosoft Windows: NT4.0/XP/Vista/7/2000/ME/98/95Linux: Red Hat 9.0, Mandrake 9.1InterfaceUSB (standard) RS232 with PS/2 |
Related manuals for A1 Touch AOD 170
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine