A1TECH JAZZ Owner's Manual
                           | |
21 Manual Valet ModeThe manual valet mode is used to add or delete remote control, disarm the systemif your remote control is lost or doesnst operate, and set up the JAZZ to integratewith your specific vehicle.1. Open the door of driverss seat and insert the key into ignition position.2. Repeat ACC/ON five times - enter the valet mode with chirp sound and red LEDturns on steadily.Technical Support䤎Warning LED on the Communication Module turns onsteadily.䤎Even if the system is in Valet Mode, Door Locking/Unlocking, and Trunk Release work normally.ÜTo exit Valet mode, repeat the procedure above and withtwo chirps, Warning LED turns off.Valet Mode by Push Switch (Optional)1. Open the door of driverss seat.2. Inset key and set totONuposition.3. Within 10 seconds, Press and hold the Valet switch for 3 seconds.- enter the valet mode with chirp sound and red LED turns on steadily.4. Pressing II button, ZZZZZ appears in the LCD screen.ÜTo exit Valet mode, repeat the procedure above and with two chirps, WarningLED turns off.䭒䤎Open door ACC / ON 5 time 䤎One chirp & LED ON䭒Key ON䭒Press 3 sec.Pressǎǎ䤎Open door 䤎One chirp & LED ON |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine