AALogic TriTone User Manual
                 | |
Allied Analogic, Inc. 5 Copyright © 2019• Press [CFG], then [F1] BCKLTE.• Use the [F2] ▼and [F3] ▲ keys to adjust the backlight• Press [F1] Set to save the setting.3.3.2 CONTRASTThe display contrast can be adjusted as needed. Temperature may affect thecontrast. The contrast may need to be turned down in hot conditions or turned upin cold conditions.• Press [CFG], then [F2] CONTRST.• Use [F2] ▼and [F3] ▲ keys to adjust the contrast• Press [F1] Set to save the setting.3.3.3 VOLUMEThe key push beep and probe volumes are adjustable as needed. The probe volumeis adjustable in the probe function.• Press [CFG], then [F3] VOLUME• Use [F2] ▼and [F3] ▲ keys to adjust the KeyPush volume• Press [F1] Set to save the setting4 SENDING TONEThe TriTone Transceiver provides tone sending options for identification of cablesor cable pairs.4.1 FREQUENCY SELECTIONThe TriTone Transceiver generates 577 Hz or 987 Hz tone. Select a tone that iscompatible with the tone probe(s) that will be used. The TriTone Transceiverretains the previous selection when the power is turned on. The frequency can beset from the Main screen or any tone operating screen.• Press the [FREQ] key• Use [F2] ▼and [F3] ▲ keys to select the desired frequency• Press [F1] SET.4.2 LEVEL SELECTIONThe TriTone Transceiver offers transmit tone levels at Normal, High, andMaximum. The lowest level that allows identification of the cable pairs shouldnormally be used. Higher tone levels may increase inductive coupling to adjacentpairs and make it more difficult to identify the correct pair. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine