AAON AA-HB-TGD-01F Technical Manual
                                                | |
Contents
| 
ZoneZoneProgramming28 HB Controller Technical GuideProgramming with the HB Service ToolHB Processor BoardHB Processor Board Status ScreensIf your HB Controller is equipped with the HB Processor board, you canaccess the available Status and Setpoint screens by using the program-ming directions that follow.The Device Address Screen is accessed by pressing the MENU key fromany screen. The current Device Address Screen will be displayed. If theCurrent device address is set for 064 (HB Controller Address), you mustchange the device address to 066 to access the HB Processor screens.Press the ADJUST ARROW from Device Address 064 to change toDevice Address 66.Once the correct Device Address of 066 is displayed as shown above,press ENTER.Line #2 displays the HB Processor name. Press the ENTER key toadvance to the HB Processor main status screens. The following screenwill then appear:Select “Main Status” by pressing the ENTER key. Press the up anddown SELECT arrow keys to move forward and backward through theMain Status screens.Date and TimeLine #1 displays the current date inside the HB Processor. Line #2displays the current time of day inside the HB Processor in 24-hourformat. Press the ENTER key to continue to the next screen.Schedule ModeLine #2 displays the current Schedule Mode. Options that may be dis-played are Occupied, Unoccupied, Force Occupied, Force Unoccupied,Global Occupied, Global Unoccupied, or Override Occupy. Press theENTER key to continue to the next screen.HVAC ModeLine #2 displays the current HVAC Mode when Space TemperatureControl is configured. Options that may be displayed are Idle, Vent-ing, Heating, or Cooling. Press the ENTER key to continue to the nextscreen.Space TemperatureLine #2 displays the current Space Temperature. Press the ENTER keyto continue to the next screen.Cooling SetpointLine #2 displays the current Cooling Setpoint. Press the ENTER key tocontinue to the next screen.Heating SetpointLine #2 displays the current Heating Setpoint. Press the ENTER key tocontinue to the next screen.H/C DemandLine #2 displays the demand for Heating or Cooling based on the SpaceTemperature in reference to the Heating or Cooling setpoint. Press theENTER key to continue to the next screen.Override LeftLine #2 displays the Override Time remaining once the Push-ButtonOverride on the Space Temperature Sensor has been activated. Pressthe ENTER key to continue to the next screen.Device Address:066Device NameHB ProcessorMain StatusSetpoints01/20/09 Fri09:50:24Schedule ModeOccupiedHVAC ModeCoolingSpace TempXX.X FCooling SetpointXX.X FHeating SetpointXX.X FH/C DemandX.X FOverride LeftX.X Hr |
Related manuals for AAON AA-HB-TGD-01F
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine