www.aasalarm.com 10A.To trigger the smoke detector, depress the clear plastic button onthe face of the smoking detector. You will hear a double beep soundto indicate that it has been activated.B. To trigger the gas detector, depress the white plastic button on theface of the gas detector. You will hear a double beep sound toindicate that it has been activated.C. To trigger the glass break detector, knock your glass window withany metal. Until you hear a double beep sound from your wirelesskeypad controller to indicate that it has been activated.For each wireless range motion detector/ wireless bean motion detector you use choose a number from 30 to 69(notice: must 2 digits), Enter the number below into the keypad/controller. In the place of {10 to 29} enter the numberyou have chosen for the sensor. after the pound sign (#), you will need to physically trigger the wireless range motiondetector/ wireless bean motion detector to activate it. Activation will be confirmed by a double beeping sound.【 Admin Password 0 3 * (30 to 69) # 】Each smoke/ gas detector/glass break detector has to be individually activated using this procedure.Activating Wireless Range Bean Motion Detectors./ Wireless Bean MotionDetectors.