LNP600N / LNP-602N User’s ManualAaxeon Technologies, LLC375.1.10 LLDPLLDP (Link Layer Discovery Protocol) function allows the switch to advertise itsinformation to other nodes on the network and store the information it discovers.LLDP interfaceThe following table describes the labels in this screen.Label DescriptionLLDP Protocol “Enable” or “Disable” LLDP function.LLDP Interval The interval of resend LLDP (by default at 30 seconds)Apply Click “Apply” to activate the configurations.Help Show help file.5.1.11 Power over Ethernet (P.O.E.)The following interface is the PoE setting interface. There are 4 ports (port 1 to port 4) actas PSE (Power Supply Equipment) ports.