—ABB DRIVES FOR WATERACQ580-34 drive modulesQuick installation guideEnglish. . . . . . . . 3 EN

ABB ACQ580-34 Quick Installation Manual

ACQ580-34

Contents of this chapter

General safety in installation, start-up and maintenance

Electrical safety in installation, start-up and maintenance

Additional instructions and notes

General safety in operation

Additional instructions for permanent magnet motor drives

Terms and abbreviations

Block diagram of the main circuit of the drive module

AC voltage and current waveforms

Layout

Drive with clear plastic shrouds (option +B051)

Drive module

LCL filter module

Control panel

Overview of power and control connections

Type designation key

Layout example, door closed

Layout example, door open (standard drive module configuration)

Layout example, door open (option +B051)

Cooling solutions

Bookshelf mounting (standard drive module configuration)

Required free space

Package drawings

Boxes

LCL filter module package

Attaching the drive module and LCL filter module to a mounting plate or wall

Attaching the drive module and the LCL filter module to the cabinet base

Protecting the motor and motor cable in short-circuits

Example circuit diagram

Measuring the insulation

Corner-grounded and midpoint-grounded delta systems

Guidelines for installing the drive to a TT system

Disconnecting EMC filter and ground-to-phase varistor

Connecting the power cables

Preparing the cable ends for connection and making 360-degree grounding at the cable entry plate

Power cable connection procedure

Connecting the control cables to the internal control unit

Installing option modules

Option slot 2 (I/O extension modules)

Option slot 1 (fieldbus adapter modules)

Connecting a remote panel, or chaining one panel to several drives

Default I/O connection diagram

Switches

NPN configuration for digital inputs (X2 & X3)

Connection examples of two-wire and three-wire sensors to analog input (AI2)

Safe torque off (X4)

Technical data

Required parts

Installing the drive module and LCL filter module into a cabinet

Connecting the power cables and installing the shrouds (option +B051)

Installing the roof and door (Rittal parts)

Control panel LEDs

Cleaning the interior of the cabinet

Cleaning the interior of the LCL filter

Replacing the drive module main cooling fans

Replacing the LCL filter module cooling fan

Replacing the standard drive module

Replacing the LCL filter module

Cabinet ventilation

Air outlet kits

Cooling fans

When is derating needed

Fuses (IEC)

Fuses (UL recognized)

Dimensions, weights and free space requirements

Losses, cooling data and noise

Typical power cable sizes

Electrical power network specification

Motor connection data

Control panel type

Materials

Applicable standards

EMC compliance (IEC/EN 61800-3:2004)

UL and CSA checklist

EU Declaration of Conformity (Machinery Directive)

Standard configuration (+E208 and +E210 included)

Drive module with option +B051