—ABB GENERAL PURPOSE DRIVESACS560 standard control programQuick installation and start-up guideENEnglish . . . . . . . 3HIहिंदी . . . . . . . . 1293AXD50000042620 Rev H MULEFFECTIVE: 2020-08-17

ABB ACS560 Quick Installation And Start-up Manual

ACS560

Contents of this chapter

General safety in installation, start-up and maintenance

Electrical safety in installation, start-up and maintenance

Additional instructions and notes

Grounding

General safety in operation

Quick installation and commissioning flowchart

Terms and abbreviations

Layout

Frame size R3

Frame R4...R8

Overview of power and control connections

External control connecting terminal, Frame size R0...R2

External control connecting terminal, Frame size R3...R5

External control connection terminals, frames R6...R8

Control panel

Type designation label

Locations of the labels on the drive

Type designation key

Checking the installation site

Required tools

Unpacking and examining delivery, frames R3...R4

Unpacking and examining delivery, frames R5

Unpacking and examining delivery, frames R6...R8

Installing the drive

Installing the drive vertically, frame size R3...R4

Installing the drive vertically, frames size R5...R8

Installing the drive vertically side by side

Other regions

Alternative power cable types

Recommended power cable types

Conduit

Signals in separate cables

Separate control cable ducts

Protecting the motor and motor cable in short-circuits

Implementing the Safe torque off function

Switching the motor power supply from drive to direct-on-line

Switching the motor power supply from direct-on-line to drive

Input power cable

Checking the compatibility with IT (ungrounded) and corner-grounded TN systems

Frames R0...R3

Frames R4...R8

Connecting the power cables

Connection procedure, frames R0...R2

electrical installation

Finalization

Motor cable

Notes

Connection procedure, frames R5...R8

Notes for frame R8

DC connection

Default control connections for the ABB standard macro

PNP configuration for digital inputs

Connection for obtaining 0...10 V from analog output 2 (AO2)

DI5 as frequency input

Safe torque off (X4)

R0...R2

R3...R5

R6...R8

Option slot 1 (fieldbus adapter modules)

Reinstalling covers, frame size R3, R4

Recommended annual maintenance actions by the user

Heatsink

Replacing the cooling fan, frames size R0...R4

Replacing the main cooling fan, frames size R6...R8

Replacing the auxiliary cooling fan, frames R6...R8

Capacitors

LEDs

Definitions

Sizing

Switching frequency derating

Fuses (IEC)

gG fuses

gR fuses

Circuit breakers

Dimensions, weights and free space requirements

Thermal losses, cooling data and noise

Terminal and lead-through data for the power cables

Terminal and lead-through data for the control cables

Electrical power network specification

EMC compatibility and motor cable length