Introduction to the manual20Start-up refers to the start-up instructions of the cabinet-installed drive.Fault tracing describes the LED indications and refers to the fault tracing instructionsof the drive.Maintenance contains preventive maintenance instructions.Technical data contains the technical specifications of the drive module, eg, theratings, sizes and technical r equirements, provisions for fulfilling the requirements forCE and other markings.Dimension drawings contains dimension drawings of the drive module installed intoa Rittal TS 8 cabinet.Example circuit diagram shows an example circuit diagram for a cabinet-installeddrive module.Resistor braking describes how to select, protect and wire brake resistors.du/dt filters describes how to select du/dt filters for the drive.Categorization by option codeThe instructions and technical data which concern only certain optional selectionsare marked with option codes, eg, +H381. The options included in the drive can beidentified from the option codes visible on the type designation label. The optionselections are listed in section Type designation key on page 32.Quick installation, commissioning and operating flowchartTask SeePlan the installation.Check the ambient conditions, ratings, requiredcooling air flow, input power connection, compatibilityof the motor, motor connection, and other technicaldata.Select the cables.Planning the cabinet installation (page 35)Planning the electrical installation (page 47)Technical data (page 115)Resistor braking (page 135)Option manual (if optional equipment isincluded)Unpack and check the units.Check that all necessary optional modules andequipment are present and correct.Only intact units may be started up.Moving and unpacking the unit (page 71)Checking the delivery (page 72)If the drive module has been non-operationalfor more than one year, the converter DC linkcapacitors need to be reformed. Ask ABB forinstructions.Check the installation site. Fasten the base of thecabinet to floor.Checking the installation site (page 70)Ambient conditions (page 122)Planning the cabinet installation (page 35)Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
