192 Technical dataOvervoltage category(IEC 60664-1)IIIProtective class(IEC/EN 61800-5-1)IAmbient conditionsEnvironmental limits for the drive are given below. The drive is to be used in aheated, indoor, controlled environment.Operationinstalled for stationaryuseStoragein the protective packageTransportationin the protective packageInstallation site altitude 0 to 4000 m (13123 ft)above sea level [above1000 m (3281 ft), seesection Derating]- -Air temperature -0 to +50 °C (32 to122 °F). No frost allowed.See section Derating.-40 to +70 °C (-40 to+158 °F)-40 to +70 °C (-40 to+158 °F)Relative humidity 5 to 95% Max. 95% Max. 95%No condensation allowed. Maximum allowed relative humidity is 60% in thepresence of corrosive gases.Contamination levels(IEC 60721-3-3,IEC 60721-3-2,IEC 60721-3-1)No conductive dust allowed.Chemical gases: Class3C2Solid particles: Class 3S2Chemical gases: Class1C2Solid particles: Class 1S3Chemical gases: Class2C2Solid particles: Class 2S2Atmospheric pressure 70 to 106 kPa0.7 to 1.05 atmospheres70 to 106 kPa0.7 to 1.05 atmospheres60 to 106 kPa0.6 to 1.05 atmospheresVibration (IEC 60068-2) Max. 1 mm (0.04 in.)(5 to 13.2 Hz),max. 7 m/s2 (23 ft/s2 )(13.2 to 100 Hz)sinusoidalMax. 1 mm (0.04 in.)(5 to 13.2 Hz),max. 7 m/s2 (23 ft/s2)(13.2 to 100 Hz)sinusoidalMax. 3.5 mm (0.14 in.)(2 to 9 Hz),max. 15 m/s2 (49 ft/s2 )(9 to 200 Hz) sinusoidalShock (IEC 60068-2-29) Not allowed Max. 100 m/s 2 (330ft./s 2), 11 msMax. 100 m/s2 (330ft./s 2), 11 msFree fall Not allowed 100 mm (4 in.) for weightover 100 kg (220 lb)100 mm (4 in.) for weightover 100 kg (220 lb)Auxiliary circuit power consumptionCabinet heater and cabinet lighting (options +G300 and +G301): 100 WExternal uninterruptible power supply (option +G307): 150 WMotor heater (option +G313): According to the heater typeMaterialsCabinet Hot-dip zinc coated 1.5 mm thick steel sheet (thickness of coating approximately20 micrometers). Polyester thermosetting powder coating (thicknessapproximately 80 micrometers) on visible surfaces, color RAL 7035 and RAL9017. PC/ABS 3 mm, color NCS 1502-Y (RAL 9002 / PMS 1C Cool Grey).Busbars Tin-plated copper
