ABB ACS880 Series Electrical Planning Instructions

Also see for ACS880 Series: Quick start up guide Quick start guide User manual Electrical planning instructions Supplement

Contents

ABB ACS880 Series Electrical Planning Instructions Manual pdf 30 page image

￭ Separate control cable ductsLead 24 V and 230 V (120 V) control cables in separate ducts unless the 24 V cable isinsulated for 230 V (120 V) or insulated with an insulation sleeving for 230 V (120 V).24 V DC230 V AC(120 V AC)230 V AC(120 V AC)24 V DC￭ Continuous motor cable shield or enclosure for equipment on themotor cableTo minimize the emission level where there are safety switches, contactors, connectionboxes or similar equipment on the motor cable between the drive and the motor:• IEC: Install the equipment in a metal enclosure with 360 degree grounding for the shieldsof both the incoming and outgoing cables, or connect the shields of the cables otherwisetogether.• UL: Install the equipment in a metal enclosure in a way that the metal conduit or shieldingof the motor cable runs consistently without breaks from the drive to the motor.30 Electrical planning guidelines