ABB ACS880 Supplement Manual
Also see for ACS880 Series: Quick start up guideQuick start guideUser manualElectrical planning instructionsSupplement
                                                  | |
Contents
| 
Signals and parameters 31Parameters listingActual signalsNo. Name/Value Description Def / FbEq160909 Centrifuge Centrifuge and Decanter actual signals.All parameters in this group are read-only unlessotherwise specified.09.01 Centrifugestatus wordStatus bit signals of Centrifuge. -0000h...FFFFh Centrifuge status word. 1 = 19.02 CentrifugestageShows actual stage of Centrifuge sequence. Seesection Centrifuge operation sequence on page 16.-Stopped Drive is not running. 0Accelerating tofill speedDrive is accelerating to the filling speed. See parameter77.07 Acc time to fill speed.1Pre wash Drive is at pre-wash speed. See parameter 77.04Prewashing speed.2Filling Drive is at filling speed. See parameter 77.01 Fill speed. 3Accelerating tospin speedDrive is accelerating to spinning speed. See parameter77.07 Acc time to spin speed.4Washing Drive is at washing speed. See parameter 77.05Washing speed.5Spinning Drive is at spinning speed. See parameter 77.02 Spinspeed.6Decelerating tounload speedDrive is decelerating to unload speed. See parameter77.08 Dec time to unload speed.7Unloading Drive is at unload speed. See parameter 77.03 Unloadspeed.8Decelerating tostopDecelerating to stop after discharge. See parameter77.09 Dec time to zero speed.9Bit Name Description0 Accelerating to fillspeed1 = Accelerating to filling speed. See parameter 77.01 Fillspeed.1 Pre wash 1 = Sequence is at pre-washing stage.2 Filling 1 = Sequence is at filling stage.3 Accelerating to spinspeed1 = Accelerating to spinning speed. See parameter 77.02Spin speed.4 Washing 1 = Sequence is at washing stage that is speed is morethan the value in parameter 77.05 Washing speed.5 Spinning 1 = Sequence is at spinning stage.6 Decelerating to unloadspeed1 = Decelerating to unloading speed. See parameter 77.03Unload speed.7 Unloading 1 = Sequence is at unloading speed.8 Decelerating to stop 1 = Deceleration to stop after unloading.9 Manual halt active 1 = Manual halt is active.10...15 Reserved |
Related manuals for ABB ACS880 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine