ABB ACS880 Supplement Manual

Also see for ACS880 Series: Quick start up guide Quick start guide User manual Electrical planning instructions Supplement

ABB ACS880 Supplement Manual Manual pdf 29 page image

Program features 296Program featuresContents of this chapterThis chapter describes the features of the SPRS control program. It also lists thefeatures not included in this control program compared to the ACS880 primary controlprogram.Programmable analogue inputsThe drive has two programmable analogue inputs: one voltage input (0/2 to 10 V or-10 to 10 V) and one current inputs (0/4 to 20 mA). Three extra analogue inputs areavailable to scale the input values of the SPRS RMIO in counts.SettingsProgrammable analogue outputsTwo programmable current outputs (0/4 to 20 mA) are available as standard. Theanalogue output signals can be proportional to motor speed, process speed (scaledmotor speed), output frequency, output current, motor torque, motor power, etc.You can write a value to an analogue output through a serial communication link.Parameter Additional informationGroup 12 Standard AI Standard outputs for selecting and processing analogue outputvalues.Group 77 Speed andFeedback SELAI as a reference source