ABB ANR96 User Manual

ABB ANR96 User Manual Manual pdf 33 page image

ANR96 - USER MANUAL-33-9) USE9.1) FUNCTION KEYS• UP & DOWN KEYSThe “UP” and “DOWN” keys allows to skip through the real time pages and toselect the programming level or to modify values during the input in the setupmenu.• LEFT & RIGHT KEYSThe “LEFT” and “RIGHT” keys allow to visualize the real time sub pages and tomove the cursor in the field of input data in the setup menu. To skip from realtime pages and to go in the menu setup it’s necessary to press simultaneouslyboth these keys. To come back at real time pages to repeat the sameoperation. Other functions allow to see average values, minimum and maximum, storage andharmonic components. When it’s possible to accede at these function two little arrows appear on thedisplay’s bottom bar.• “ENTER” KEY“ENTER” key, if pressed for at least 3 seconds on any of the real time pages(instantaneous value pages) sets the current visualized page as “MAIN PAGE”.In the SETUP menu the “ENTER” key allows to enter in the setting menu or submenu inorder to program and/or set values and confirm the operation/s.• SYSTEM RESETTo reset the unit directly from the keyboard withoutentering in the Setup menu (where from there it is alsopossible to reset the unit through Reset Global on chapter11.12), operator may press simultaneously the 4 arrowkeys, after 2 seconds the complete unit will be re-set.10) REAL TIME VALUESThe real time pages show all the possible performed measurement of the instrument during theevolution. All visualized pages may be set as main page by the operator, this means that the preferredpage may be set as the one to be visualized. To set the main page the operator shall press the"ENTER" key for at least 2 seconds, the symbol of the main page is shown with a "#" on the top rightside of the display. The visualization of real time measure includes a sequence of principal pages, thatit’s possible to see pressing “UP and “DOWN” keys, and secondary pages that it’s possible to seepressing “LEFT” and “RIGHT” keys when these symbols ( ◄ and ►) compare.OK