ABB AWT210 Manual

Also see for AWT210: Operating instruction Manual Manual

Contents

ABB AWT210 Manual Manual pdf 3 page image

AW T 2 1 0 P R O F I B U S PA 2 - W I R E T R A N S M I T T E R | C O M/A W T 2 1 0/ P R O F I B U S - E N R E V. A31 Health & SafetyDocument symbolsSymbols that appear in this document are explained below:DANGER – SERIOUS DAMAGE TO HEALTHThis symbol in conjunction with the signal word‘DANGER’ indicates an imminent electrical hazard.Failure to observe this safety information will result indeath or severe injury.WARNING – BODILY INJURYThis symbol in conjunction with the signal word‘WARNING’ indicates a potential electrical hazard.Failure to observe this safety information will result indeath or severe injury.CAUTION – MINOR INJURIESThis symbol in conjunction with the signal word‘CAUTION’ indicates a potentially dangeroussituation. Failure to observe this safety informationmay result in minor or moderate injury. The symbolmay also be used for property damage warnings.IMPORTANT (NOTE)This symbol indicates operator tips, particularlyuseful information or important information aboutthe product or its further uses. The signal word‘IMPORTANT (NOTE)’ does not indicate a dangerousor harmful situation.Safety precautionsBe sure to read, understand and follow the instructionscontained within this manual before and during use of theequipment. Failure to do so could result in bodily harm ordamage to the equipment.WARNING – BODILY INJURYInstallation, operation, maintenance and servicingmust be performed:• by suitably trained personnel only• in accordance with the information provided in thismanual• in accordance with relevant national and localregulationsPotential safety hazardsAWT210 transmitter – electricalWARNING – BODILY INJURYTo ensure safe use when operating this equipment,the following points must be observed:• Up to 240 V AC may be present. Be sure to isolatethe supply before removing the terminal cover.• Normal safety precautions must be taken to avoidthe possibility of an accident occurring whenoperating in conditions of high pressure and/ortemperature.Safety advice concerning the use of the equipmentdescribed in this manual or any relevant MaterialSafety Data Sheets (where applicable) can beobtained from the Company, together with servicingand spares information.Safety standardsThis product has been designed to satisfy the requirements ofIEC61010-1:2010 3rd edition ‘Safety Requirements for ElectricalEquipment for Measurement, Control and Laboratory Use’ andcomplies with US NEC 500, NIST and OSHA.This equipment complies with the requirements of CEI/IEC61010-1:2010 ‘Safety Requirements for Electrical Equipment forMeasurement, Control and Laboratory Use’ and complies withUS NEC 500 and Occupational Safety & Health Administration.If the equipment is used in a manner NOT specified by theCompany, the protection provided by the equipment may beimpaired.