ABB Busch-Welcome Operating Instructions Manual

Contents

ABB Busch-Welcome Operating Instructions Manual Manual pdf 10 page image

Operating InstructionsBusch-Welcome ® Start-upOperating Instructions | 1473-1-8354 — 10 —1. Link the external device in a common network to the IP gateway.2. Launch the control panel.3. Open the "Network and Sharing Center".4. Open the "Local area connection" (1).5. In the next window, select the "Properties" (2) button.6. In the next window, select the list item "Internet Protocol version 4 (TCP/IPv4)" (3).7. Click the "Properties" button (4).The "Properties" window for Internet protocol version 4 (TCP/IPv4) opens.8. Select the option (5) to manually enter the IP address.9. Assign an IP address (6) within the same range as the IP gateway.The default IP gateway address is 192.168.1.111.NoteThe IP address of the PC cannot be identical to the IP address of the IP gateway.Select, for example, 192.168.1.55.10. Click the "Subnet Mask" (7) box.The current value is entered automatically and does not need to be changed.11. Click "OK" to confirm the entry.Pos: 25 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Anzeige der IP-Adresse @ 36\mod_1365745928155_15.docx @ 294086 @ 111111111111111111111111111111111111111111111111111111111112111111221111222211111111111111131111111131 @ 15.4 Entering the IP address directlyPos: 26 /#Neustruktur#/Online-Dokumentation (+KNX)/Bedienung/Türkommunikation/Busch-Welcome/Anzeige der IP-Adresse - 83341 @ 36\mod_1365745979907_15.docx @ 294102 @ 11111112111322222221111 @ 1Enter the IP address of the gateway directly into the address line of your browser.You can display the current IP address of the gateway as follows:1. Open the user interface of your router. Here you will see a list of all connected devices including their namesand IP addresses. For example, when using a Fritzbox under: Home network / network list. Copy the IPaddress of the device "IP gateway" and insert it in the address line of your browser to call up the userinterface of the gateway.2. Use a special program to identify the IP addresses and associated devices in the network. For example:SoftPerfect Network Scanner (Windows); Overlook Fing (iOS/ Android)Pos: 27 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 221111222211111111111111131111111131 @ 1