C1300Advanced circular chart recorder 2 OperationIM/C1300 Rev. J 152.3.10 Totalizer Display – Dual + Flow RateThe following screen is displayed only if Totals Display is set to Dual + Flow Rate (Section 3.4) and Tot X Source (where X is thetotalizer number) is set to anything other than None – see Section 3.7, page 35.2.3.11 Data LoggingTotalizers 1 and 2Measured value and measured value units.Totalizer value.Totalizer units and channel number.Optional data logging hardware installed – see Section 2.3.11, below.Optional data logging hardware not installed – see Section 2.3.3, page 10.Data Logging StatusProvides information on current data logging status.Press the key to place data logging off-line.When data logging is off-line, the Compact Flash card can be removed safely.If the card is not removed within 1 minute, data logging is placed on-line automatically. A timerindicates the number of seconds remaining before data logging resumes.This screen is displayed when a Compact Flash card is not inserted.Data logging starts automatically when a Compact Flash card is inserted.see Section 2.3.3, page 10./F +0D3EEE(F * _F( +0D3EE// E/ _( & ## &(*3&(EE /,M -0 & ## &(*3&(EE /,M -0 &O (*;. [ ,M -0 [ 3!03>* ?,M )$