ABB COM600 Series User Manual

Also see for COM600 series: User manual User manual User manual Configuration manual Configuration manual

Contents

ABB COM600 Series User Manual Manual pdf 31 page image

Analog set point (APC)3.4.5.4.Table 3.4.5.4-1 Configurable APC properties for OPC clientDescriptionValue or Value range/ DefaultProperty/ Para-meterBasicCommon data class according to IEC61850.APCCommon DataClassAddressesControl index.-1...65535Default: -1Control IndexIndication index.-1…65535Default: -1Indication IndexCommonData sent from the slave to the master canbe assigned to four classes. Data in class1 is sent with higher priority than data inclass 3.Class 0…3Default: Class 0ClassMaximum update rate of signal statechanges between the OPC server andclient in milliseconds. 0 means that theserver sends all changes to the client.0…65535Default: 0Update RateData Class Spe-cificObject number for control.Default: Analog control outputblock (41).Control ObjectObject number for indication.Analog input (30, 32)Analog output (40)Default: Analog input (30, 32)Indication ObjectDefines whether all changes in value aresend to the master.TrueFalseDefault: FalseSend All updatesDefines whether the value is sent as 16or 32 bit value.Send as 32 bit valueSend as 16 bit valueDefault: Send as 16 bit valueSend As 16 BitValue31COM600 series, Version 5.01MRS755495DNP 3.0 Serial Slave (OPC) User's Manual