ABB COM600 Station Automation Series User Manual

Also see for COM600 series: User manual User manual User manual Configuration manual Configuration manual

ABB COM600 Station Automation Series User Manual Manual pdf 32 page image

Configuration4.About this section4.1.This section describes the configuration tasks common to all OPC servers, and gives anoverview of the configuration tasks related to OPC clients.All the possible configuration scenarios are not included inthis manual. Refer to the corresponding user’s guides listedin 1.8, Related documents for more detailed instructions. Youmust have configuration rights to be able to perform the tasksdescribed in this section.The configuration tasks described in this section apply onlyto COM610 and 615.Configuration and maintenance4.2.Communication Engineering Tool is used to configure and maintain the Gateway.Communication networks are described in the Communication structure of the ProjectExplorer window. The structure is built using OPC server/client, communication chan-nel/subnetwork and device objects. These objects have communication properties thatcan be accessed via the Object Properties window. The properties define for examplethe communication port, bit rate, timing parameters, unit addresses and so on.The substation structure of CET is used to configure the HMI functions of the COM600products. The substation structure presents the functional view of the substation. Itincludes substation, voltage level, bay, busbar and conducting equipment objects.The Single line diagram is a graphical presentation of the process objects in the substation.The Single line diagram can be edited on different levels. The bay layout can be con-figured by opening the SLD Editor from a bay object. When the SLD Editor is openedfrom a voltage level object, it is possible to assign the positions of the bays within avoltage level. The position of the voltage levels in the complete substation single linediagram is done by opening the SLD editor from the substation object.Substation objects are linked to communication structure objects by using the DataConnection tool. For example the circuit breaker object in the substation structure islinked to the CSWI logical node in the communication structure. The link between thestructures is also used on the event list, to present the events using the names accordingthe substation structure.321MRS756125COM600 Station Automation SeriesCOM600 3.2User's Guide