ABB COM600 Station Automation Series User Manual

Also see for COM600 series: User manual User manual User manual Configuration manual Configuration manual

Contents

ABB COM600 Station Automation Series User Manual Manual pdf 8 page image

ConfigurationIn this section you will find an overview of configuration. You are given instructionson how to configure DNP3.0 OPC Server related objects and the model of a substationor system.OperationThis section covers the basic operation procedures you can carry out when transferringor activating the Communication Gateway COM610 computer and Station Computer615 with new configurations.You are also given instructions on how to monitor and control the conditions of DNP3.0network.Technical referenceThis section describes the IEC 61850 data modeling. This section also containsattributes and a list of status codes.Document conventions1.4.The following conventions are used for the presentation of material:• The words in names of screen elements (for example, the title in the title bar of awindow, the label for a field of a dialog box) are initially capitalized.• Capital letters are used for the name of a keyboard key if it is labeled on the keyboard.For example, press the ENTER key.• Lowercase letters are used for the name of a keyboard key that is not labeled on thekeyboard. For example, the space bar, comma key, and so on.• Press CTRL+C indicates that you must hold down the CTRL key while pressingthe C key (to copy a selected object in this case).• Press ESC E C indicates that you press and release each key in sequence (to copya selected object in this case).• The names of push and toggle buttons are boldfaced. For example, click OK.• The names of menus and menu items are boldfaced. For example, the File menu.• The following convention is used for menu operations: MenuName > Menu-Item > CascadedMenuItem. For example: select File > New > Type.• The Start menu name always refers to the Start menu on the Windows taskbar.• System prompts/messages and user responses/input are shown in the Courier font.For example, if you enter a value out of range, the following message is displayed:Entered value is not valid. The value must be 0 to 30.81MRS756566COM600 Station Automation SeriesDNP 3.0LAN/WAN Master(OPC) 3.2 User's Guide