Operation4.About this section4.1.This section describes the basic operation procedures you can carry out after the objectproperties for the DNP LAN Slave OPC Client have been configured.After this, you can, for example, monitor and control the condition of connections innetwork. This is done by using the Online diagnostics function in SAB600.Activating COM600 with new configurations4.2.For information about activating COM600 with new configuration, see COM600 User’sManual.DNP LAN Slave OPC Client diagnostics4.3.To view version information on DNP LAN Slave OPC Client or to monitor and controlthe state of the client, right-click the DNP LAN Slave OPC Client object and selectOnline diagnostics, see Figure 4.3-1.A040346.jpgFigure 4.3-1 DNP LAN Slave OPC Client Online diagnosticsIn Online diagnostics box you can:• reset DNP LAN Slave OPC Client• view the event log file, see Figure 4.3-2• clear the event log file37Station Automation COM600 3.41MRS755496DNP 3.0 LAN/WAN Slave (OPC) User's Manual