ABB ControlMaster CM30 User Manual

Also see for ControlMaster CM30: Communications supplement User guide User guide Manual Manual

Contents

ABB ControlMaster CM30 User Manual Manual pdf 25 page image

ControlMaster CM30, CM50 and CMF310Universal process controllers, 1/ 4, 1/ 2 DIN and fieldmount 5 Operator Level MenusIM/CM/ED–EN Rev. X 235 Operator Level Menus5.1 Diagnostic Status BarOperator level menus are used to adjust setpoint(s) and output(s), selectsetpoints, select the view and to enter Basic and Advanced modes (viathe Access level).To access Operator Level menus:1. From the Operator Page, press to view the available menus.2. Use the / keys to scroll through the menus and menuoptions.3. Press to expand menu levels and to select menu options orpress to return to the previous menu.Menu functions are described in Table 5.1.Autotune Used to start or stop an autotune routine. This menu is enabled only if Autotune modeis On.Adjust Enables a value to be adjusted using the / keys.The icon next to a value indicates the current adjustable selection.Setpoint Select Selects the local setpoint to be used (displayed only if more than 1 local setpoint isconfigured).Alarm Acknowledge Acknowledges any active but unacknowledged alarms.View Select Selects the Operator view to be displayed.Enter Config. Level Displays the Access Level selection views – see Section 5.4, page 24 for securityoptions.Profile Displays the Profile Level selection views – see Se4ction 7.6, page 60 for Profileoptions.Table 5.1 Operator Level Menu FunctionsFig. 5.1 ControlMaster Diagnostic Status Bar (ControlMaster CM30 Shown)Adjust...Setpoint Loop 1View SelectEnter Config. LevelProfile Description of diagnosticor alarm tag.The highest prioritydiagnostic or alarm isdisplayed. Other activediagnostic / alarm statescan be viewed on theDiagnostic View – seepage 24.FailureMaintenanceOut of SpecCheck FunctionNAMUR (NE107) Status IconHigh Process AlarmLow Process AlarmHigh Latch AlarmLow Latch Alarm