ABB CoriolisMaster FCH400 Series Operating Instructions Manual

Also see for CoriolisMaster FCH400 Series: Instruction manual Manual Configuration guide

Contents

ABB CoriolisMaster FCH400 Series Operating Instructions Manual Manual pdf 76 page image

76 CoriolisMaster FCB400, FCH400 CORIOLIS MASS FLOWMETER | OI/FCB400/FCH400-EN REV. E… 9 Operation… Switching to the information levelOnce you have logged on to the corresponding access level, youcan edit or reset the password. Reset (status ‘no passworddefined’) byselecting ‘ ’ as a password.Enter Password**********QRSTUVWXYZ 0123456Next OK4. Enter the appropriate password. No password is preset inthe factory settings. Users can switch to the configurationlevel without entering a password.The selected access level remains active for 3 minutes. Withinthis time period you can toggle between the process displayand the configuration level without re-entering thepassword.5. Use to confirm the password.The LCD display now indicates the first menu item on theconfiguration level.6. Select a menu using / .7. Confirm the selection with .Resetting the customer passwordIf the set password has been forgotten, the password can bereset and reassigned.A one-time password is needed for this purpose and can begenerated by ABB Service upon request.To reset the password, the password has to be enteredincorrectly once for the ‘Standard’ user level. When theconfiguration level is called up again, a new entry ‘Resetpassword’ then appears in the list of access levels.1. Switch to the configuration level with .Access LevelRead OnlyStandardReset passwordBack Select2. Use / to select the ‘Reset password’ entry.3. Confirm the selection with .Reset passwordID : 12345678Pin : 00001Password : *******RSTUVWXYZ 0123456Back Select4. Contact ABB Service and request a one-time password,stating the ‘ID’ and ‘Pin’ shown.5. Enter the one-time password.NoteThe one-time password is only valid once and needs toseparately requested with each password reset.6. Confirm the input with .After the one-time password has been entered, the password forthe ‘Standard’ access level is reset and can be reassigned.