48 1HSA 801 080-15en EXCOUNT-II Users Manual5. Transceiver menus5.3.4 Total readingNot available in all versions.Select sensor ID to read data from with the key.Start the reading by pressingBefore the transmission begins, the operating voltage must begiven. (see 5.3.3.1)Each reading is made in turn automatically.A successful transmission is marked withA failed transmission is marked withIf the transmission was unsuccessful, an error codewill be displayedIf any reading is unsuccessfull presskey again to repeat the reading.Back to total reading menu5.4 Settings menuSelect alternative with the key.Then pressBacklight settings (see 5.4.1)Antenna settings (see 5.4.2)Contrast settings (see 5.4.3)Clock and date settings (see 5.4.4)Back to main meny
