IP54 sealing gasket for RVTTechnical specificationThe IP54 sealing for RVT gives a protection from the front panelside.− IP5X :• Dust-protected. Ingress of dust is not totally prevented,but dust shall not penetrate in a quantity to interferewith satisfactory operation of the apparatus or to impairsafety.• Wire protected. Protected against access to hazardousparts with a wire of diameter 1 mm.− IPX4 :• Protected against splashing water. Water splashedagainst the enclosure from any direction shall have noharmful effects.IP54 sealing installationStep 1: Slide the RVT (a) perpendicularly to the capacitor bankcubicle.Step 2: Rotate the RVT (b) to insert it into the capacitor bankcubicle.Installation guideStep 2(b)Step 1(a)Note: cut out dimensions are 138x138 mm.

ABB IP54 Installation Manual