2 Installation and Commissioning, IRC52.7.2. Connecting a USB memory to the computer unit3HAC027707-001 Revision: D82© Copyright 2007-2008 ABB. All rights reserved.2.7.2. Connecting a USB memory to the computer unitLocation DSQC639A USB memory may be connected to either one of the USB ports on the computer unit. TheUSB ports are shown in the figure below:xx0600002895ConnectionA USB 1, 2 The USB connectors provide two legacy USB 2.0 ports supporting HighSpeed/Full Speed/Low Speed (HS/FS/LS)Action Info/illustration1. Remove the end cover on the USB memory and connectit to the connector.Do not disconnect the USB memory approx. 10 secondsafter connecting it.The USB memory and itscontents may now beaccessed from the computerunit just as any other harddrive unit.2.CAUTION!CAUTION!Handling of USB memory is described in Operatingmanual - IRC5 with FlexPendant, section File Managing.
