                                                       | |
Contents
| 
ABB-Welcome| — 42 —4.2.10.4 Call code settingsFig. 35 Call code settingsTo the “call code settings” menu has the following functions:No. Functions1 Code type- Change the code type by ticking the box (automatic switchover) orpressing the “plus/minus” buttons.- A user can select and click on a physical address to call an indoorstation.- A user can select and click on a logic address. (The logic address is setin the “user list management” menu.)2 Digit- When choosing a logic address, you should set the digits of the logicaddress by using the “plus/minus” buttons. (01-08 digits are available,and the digits of the logic address must be consistent with the ones set inthe “user list management” menu.)3 “OK”- Click on this button to save the settings.4 “Back”- Click on this button to return to the start page.BackCALL CODE SETTINGPhysical AddressOK-3412Code Type05Digit+ |
Related manuals for ABB Welcome M2303
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine