ABB MREL-01 User Manual

Contents

ABB MREL-01 User Manual Manual pdf 7 page image

7InstallationInstalling the ModuleDelivery CheckThe option package contains:ï MREL-01 moduleï Grounding stand-offï Panel port adapterï Warning stickers in several languagesï This manualMountingWARNING! Follow the safety instructions given in this guide andin the ACS310 or ACS350 Userís Manual.To mount the MREL-01 module:1. If not already off, remove mains power from the drive.2. Remove the control panel or panel cover. (See instructions in thedrive Userís Manual.)3. Remove the grounding screw in the top left corner of the driveíscontrol panel slot and install the grounding stand-off in its place.4. Ensure that the panel port adapter is attached to either the panelport of the drive or the mate part of the MREL-01 module.5. Gently and firmly install the MREL-01 module to the driveís panelslot directly from the front.NOTE! Signal and power connections to the drive areautomatically made through a 6-pin connector.6. Ground the module by inserting the screw removed from the drivein the top left corner of the MREL-01 module. Tighten the screw.