ABB MicrOS 410 Installation Manual
                                 | |
Contents
| 
Chapter 2 MicrOS 410 Installation Guide 25Alignment LEDThe MicrOS 410 has an alignment LED on the back of the unit. This LED helps the installeroptimally aim the MicrOS 410 at the Wi-Fi router to which it will communicate. The MicrOS410 directional antenna has a 3dB beam width of 30o and a 6dB beam width of 35o. This widerange makes the unit easy to align. The alignment LED is useful in getting maximumperformance.Figure 6 Alignment LEDThe MicrOS 412 must first associate with a router before the alignment LED can be used. Usethe following procedure to properly align the MicrOS 410:1. Install the MicrOS 410 and aim it in the general direction of the router you want it toassociate to.2. Move the MicrOS 410, if necessary, until it associates with the router. See Table 8 (theStatus LED must be solid green).Flashing The unit has power but is not ready. It may be in the process of associating withthe network or it may not be able to associate with a network.On The unit is associated with the network and operating properly.Table 8 LED Indicator StatesState DescriptionAlignment LED |
Related manuals for ABB MicrOS 410
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine