PQFA Instructions ManualAsea Brown Boveri Jumet S.A. 8560 AH: 015 AIn1Figure 10.7. Spectrum WindowThe graph indicates the maximum value of the scale. In the above rightcorner, you have the rank (0 is for DC) and the value in amps for theharmonic identified with the arrow (? ).Press the ? or ? key to shift your selected harmonic of one order. If youwant to move faster in the spectrum, you can use the ? or ? key. You willthen shift of 15 orders.Press MENU and you come back to the Consulting level MENU.10.8. Remote control and alarm contact10.8.1. Remote controlThe PQFA may be switched on and off from a remote location.The remote switch has to be connected to connection points X12-3 and X12-4of terminal marked X12. In this configuration, applying a voltage to the pointsX12-3 and X12-4 will switch on the filter. It will switch off when the voltage isremoved.The remote/local switch of the master cubicle door has to be switched inremote position.Note: once remote is on, the push buttons of the door are not operationalanymore.RESET RUN LOC/REM ON CLOSE OPEN
