ABB RHDE250 Operating Instructions Manual

Also see for RHDE1250: Service instruction Operating instruction

ABB RHDE250 Operating Instructions Manual Manual pdf 13 page image

Installation42/68-167-EN RHDE250 ... 4000 (Contrac) 13Pos: 11.1 /Überschriften/1/M - R/Montage @ 0\mod_1140519732218_3101.doc @ 31594 InstallationPos: 11.2 /Überschriften/1.1/1-spaltig/A - F/Antriebskontrolle @ 10\mod_1181632527031_3101.doc @ 1034154.1 Actuator checkPos: 11.3 /Montage/Aktorik/Elektr. Schwenkantriebe/Allgemein/Antriebskontrolle @ 10\mod_1181568760671_3101.doc @ 103037Before you start to install the actuator make sure that the delivery status corresponds to theordered status and to the intended use.• Check the oil level when installing the device in positions other than IMB 3.• Did you fasten the separately delivered venting plug (spare part no. 9287338) in theuppermost bore (depending on the mounting orientation)?• Make sure that the motor and the connection chambers are free of dirt, moisture andcorrosion.Pos: 11.4 /Überschriften/1.1/1-spaltig/A - F/Einbaulage @ 3\mod_1158651041937_3101.doc @ 417024.2 Mounting positionPos: 11.5 /Montage/Aktorik/Elektr. Schwenkantriebe/RHDE250...4000/Einbaulage Zeichnung @ 10\mod_1181815089156_3101.doc @ 106121The spur gears of the actuator RHDE250 ... 4000 (Contrac) are oil lubricated. They contain themax. oil quantity when leaving the manufacturer. Once the actuator is installed replace theuppermost check plug by the separately supplied venting plug.IMB 3 IMB 6 IMB 7 IMV 61 2M00304Fig. 31 Inspection plug 2 Venting plugPos: 11.6 /Montage/Aktorik/Elektr. Schwenkantriebe/RHDE250...4000/Einbaulage RHDE250...4000 @ 10\mod_1181633075968_3101.doc @ 103484All mounting orientations shown in fig. Fig. 3 are permissible. To facilitate mounting andmaintenance, however, it is recommended to use orientation IMB 3. For each mountingposition, check the oil level prior to commissioning.In order to ensure sufficient ventilation and space for the motor de-/installation allow for thefollowing min. space to the motor hood:Actuator SpaceRHDE250 60 mm (2.36 inch)RHDE500/800 60 mm (2.36 inch)RHDE1250/2500 80 mm (3.15 inch)RHDE4000 80 mm (3.15 inch)Pos: 11.7 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830