ABB Relion 615 Series Operation Manual

Also see for Relion 615 series: Manual Engineering guide Manual Product guide Installation manual

Contents

ABB Relion 615 Series Operation Manual Manual pdf 49 page image

decimal values, the change can be fractions 0.1, 0.01, 0.001 (...) depending onthe active digit.For parameters with defined steps, digits smaller than the stepvalue cannot be edited.3. Press or to move the cursor to another digit.4. To select the minimum or maximum value, select the arrow symbol in frontof the value.• To set the value to the maximum, press .• To set the value to the minimum, press .A070756 V3 ENFigure 22: Arrow symbol is active, the value is set to the maximumAfter pressing , the previous value can be restored by pressing once,and vice versa. Another press of or sets the value to the lower orhigher limit. The symbol in front of the value is ↕, when the previous value isshown.A070757 V3 ENFigure 23: Restoring the previous value4.1.12.2 Editing string values1. Activate the setting mode and select a setting.1MRS756708 C Section 4Using the HMI615 series 41Operation Manual