ABB Relion 630 Series Engineering Manual

Also see for Relion 630 Series: Quick start guide Quick start guide Operation manual Product guide Operation manual

Contents

ABB Relion 630 Series Engineering Manual Manual pdf 90 page image

• The same as LatchedAck-F-S but the LED starts with steady state andflashes after acknowledgment.• LatchedColl-S• The LED illuminates in all cases in steady mode only• The LED latches a signal change from OFF-ON until it is acknowledged bythe operator.• The LED stays in steady mode when it is reset and the signal is still in ONstate.• The LED is OFF only after the signal has changed to OFF state AND it isreset by the operator via 'Clear' operation.• LatchedReset-S• This mode is used for all LEDs that are used to indicate a disturbance. TheLEDs will stay in the last state after the disturbance run time until they arereset after a defined time.• The timers are set in Parameter Setting tool in the function block LEDGEN.IEC09000657-1-en.vsdGUID-60FA2D59-4A4D-4DB7-90F8-5648E7C0C1DA V1 ENFigure 59: LHMI: LED operation mode6.1.2 LED operation modesDescription of different operation modes for LEDs to be configured in ApplicationConfiguration tool and Parameter Setting tool.Six operation modes are listed in the drop down menu in Parameter Setting tool.• Follow-S• Follow-F• LatchedAck-F-S• LatchedAck-S-F• LatchedColl-S• LatchedReset-SSection 6 1MRS756800 FLocal HMI engineering84 630 seriesEngineering Manual