ABB SACE Tmax XT2 User Manual

Also see for SACE Tmax XT2: Manual Manual Operating instructions Quick start guide Manual

Contents

ABB SACE Tmax XT2 User Manual Manual pdf 203 page image

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 203Others accessories60 - Ekip Signalling 10KEkip Signalling 10K is an external accessory signalling module, which can be installed on astandard 35 mm DIN guide (DIN EN 50022, type TS 35x15 mm).The module has: Ten programmable output contacts. Ten or eleven programmable digital inputs. One startup LED and twenty or twenty-one signalling LEDs (one for each output/input).The module can be set in four different configurations One in the case of a connection to a bus link network. Three configurations in the event of connection via Local Bus (to enable up to three modulesto be connected to the same release)The module can can be supplied at 110-240 VAC / DC or 24-48 VDC.More information on Ekip Signalling 10K is available on the websitehttp://www.abb.com/abblibrary/DownloadCenter/, document 1SDH001318R0002.IMPORTANT: make sure that you have read the safety requirements andrequirements regarding prevention of unauthorized accesses.