ABB Welcome User Manual
Also see for 83300-500: Manual
                                                          | |
The following settings are to be carried out.Setting the address of the outdoor station: Fig. 24The allocation to one of the four inputs of the ABB-Welcomesystem is made on the outdoor stations and the associatedswitch actuators for door and light via the setting of theaddress.Here the rotary knob house/outdoor is set on an addressbetween 1 and 4. The knob is located on the rear of theComfortable for the electrical installers.Setting in the workshop. Installing at the building and in the apartment.Fig. 24outdoor station or the front of the MDRC switch actuator.Setting the button sounds on/offOn the outdoor stations the acoustic feedback signal isswitched on and off via the "TT" button sounds switch whena doorbell button is pressed. The switch is located on therear of the outdoor station.TopK10 K1 TTON01 2345678901234567890123456789AddressOutdoor stationBell buttonTens digitBell buttonSingle digitButton sounds(ON = active)K10K1TTRotary knob for setting the address of anoutdoor station04Basic settingsWell-prepared for everything. Several settings need to be madeprior to the installation of an ABB-Welcome system. These canbe carried out by the electrical installer already at the factory,so that the devices can be directly installed at the customer'spremises.36 Commissioning | User Manual ABB-Welcome |
Related manuals for ABB 83300-500
manualsdatabase
Your AI-powered manual search engine