8䎜䎓䏲 q䎜䎓䏲䎜䎓䏲540 SizeMotorRemove Spur Gearand bearings.Attach a motor with 3X6mm Button Screw.Attach a counter gear, after put on a pinion gear.After then, attach gear cover with body clip.To get a perfect gear mesh, place a piece of paperbetween the gears and tighten the motor mountscrews. Adjust motor position for smooth gear mesh.Copy Paper3 x 6 mmButton Screw3 x 6 mm Washer / Silver22T Pinion Gear(48 Pitch)3 x 3 Set Screw3 x 6 mmButton Screw3 x 6 mm Button Screw22T Pinion Gear(48 Pitch)3 x 3 Set Screw3 x 8 mmButton Screw3 x 7 mm Washer / Black3 x 7 mm Washer / Black3 x 8 mm Button ScrewServo HolderServo HolderServo HolderSteering L CrankSteering Rod EndClick !**When the power is ON, the servo horn shouldbe in the neutral position as shown in the picture.STEERING LINKAGEMOTOR INSTALLATION1413

ABC Hobby Grid Instruction Manual