26SETTING THE EURO CONVERSION FEATURE__________________________________________________________________CONVERSION FEATURE: Useful along Border States for currency conversionThe Euro Conversion feature provides a automatic method of currency conversion. It establishes one currency as the Localcurrency and another currency as the converted currency. Once the rate is established, it will remain the rate unless changed.This feature does not use a daily exchange rate but is established through the following programming steps. The rate can bechanged as frequently as one would want to change the rate, either daily, weekly, monthly or annually.There are a few steps to set up the Euro Conversion feature.- Activate/Disable the System- Print the Currencies to be printed- Establish the Local/Euro Currency as Standard- Setting the Conversion RatesActivate/Disable the Euro Conversion Feature:1. If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has beenassigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.2. Type [7]3. Enter either [0] or [1] [0] disables the feature; [1] activates the feature.4. Press the [RA/Euro] key to finish.Print the Currencies to Be Printed:1. If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has beenassigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.2. Type [9]3. Enter either [0] or [1] [0] print both currencies; [1] print only tendered currency.4. Press the [RA/Euro] key to finish.Establish the Local/Euro Currency as Standard:1. If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has beenassigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.2. Type [10]3. Enter either [0] or [1] [0] = Local; [1] Euro.4. Press the [RA/Euro] key to finish.Setting the Conversion Rates:2. If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has beenassigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.3. Type [0 - 8] 0-8 is the number of decimal places for the local currency4. Type [ 0-8] 0-8 is the number of decimal places for the Euro currency5. Type [0.00000001 - 999999] this is the rate of conversion. See example below.6. Press the [VOID] key to finish.In the above step you establish the rate of the local currency and the rate of the converted currency. For instance, for use alongUS/Canadian borders, the local currency is US dollars (USD) and the converted currency is Canadian dollars (CND); theconversion rate might be 1 USD = 1.5 CND. To program this example, enter:1 (for USD) 2 (for CND) 000015 (for conversion rate) [VOID]